Team:BV CAPS Kansas/Project/Methods

From 2013hs.igem.org

(Difference between revisions)
Line 1,125: Line 1,125:
Two separate methods for getting the appropriate restriction sites on the PLC-5 gene were considered. <br>
Two separate methods for getting the appropriate restriction sites on the PLC-5 gene were considered. <br>
<b>PCR AND SITE-DIRECTED MUTAGENSIS</b>
<b>PCR AND SITE-DIRECTED MUTAGENSIS</b>
-
<br>The first part first method involved using PCR annealing and extension to add the BioBrick standard restriction sites per the instructions given by the Registry. Theoretically, this method was simple. All it required was forwards and reverse primers that consisted of the BioBrick prefixes and suffixes and the first twenty base pairs of the gene.  
+
<br>The first part first method involved using PCR annealing and extension to add the BioBrick standard restriction sites per the instructions given by the Registry. Theoretically, this method was simple. All it required was forwards and reverse primers that consisted of the BioBrick prefixes and suffixes and the first twenty base pairs of the gene. <br>
-
Forward primer<br>
+
<i>Forward primer</i><br>
5’-<font color="red"> GTTTCTTGGAATTCGCGGCCGCTTCTAGATG </font> <font color="green"> TCAAAGTCCCACAGTGAAGC</font> -3’  
5’-<font color="red"> GTTTCTTGGAATTCGCGGCCGCTTCTAGATG </font> <font color="green"> TCAAAGTCCCACAGTGAAGC</font> -3’  
-
<br>Reverse Primer<br>
+
<br><i>Reverse Primer</i><br>
To orient the sequence 5’-to-3’, it was necessary to use the reverse compliment of the last twenty base pairs of the gene. <br>
To orient the sequence 5’-to-3’, it was necessary to use the reverse compliment of the last twenty base pairs of the gene. <br>
5’-<font color="red"> GTTTCTTCCTGCAGCGGCCGCTACTAGTA </font> <font color="green"> TTATTACGGGACGGGCACCACGCGCA </font> -3’
5’-<font color="red"> GTTTCTTCCTGCAGCGGCCGCTACTAGTA </font> <font color="green"> TTATTACGGGACGGGCACCACGCGCA </font> -3’
Line 1,137: Line 1,137:
Site-directed mutagenesis is a method for altering the sequence of DNA and can be used to produced both point and frame-shift mutations.  In this case, it was possible to take advantage of codon redundancy and alter the DNA sequence without altering the amino acid sequence.  
Site-directed mutagenesis is a method for altering the sequence of DNA and can be used to produced both point and frame-shift mutations.  In this case, it was possible to take advantage of codon redundancy and alter the DNA sequence without altering the amino acid sequence.  
Primer design was also very simple, as the primers were identical to the gene except that they contained the desired mutations. Again, the primers were about 20 bp to ensure that they would only attach to one region along the gene. <br>  
Primer design was also very simple, as the primers were identical to the gene except that they contained the desired mutations. Again, the primers were about 20 bp to ensure that they would only attach to one region along the gene. <br>  
-
Forward primer<br>
+
<i>Forward primer</i><br>
Template strand- 5’- ctcatctcc<font color="red">ctgcag</font>gtgaagcag 3’<br>
Template strand- 5’- ctcatctcc<font color="red">ctgcag</font>gtgaagcag 3’<br>
   
   
Line 1,143: Line 1,143:
   (Restriction sites are in red, point mutation is in blue)
   (Restriction sites are in red, point mutation is in blue)
<br>
<br>
-
Reverse primer<br>
+
<i>Reverse primer</i><br>
Again, the reverse primer necessitated the use of the reverse compliment of the original sequence. <br>
Again, the reverse primer necessitated the use of the reverse compliment of the original sequence. <br>
Template strand 5’- CTGCTTCACCTGCAGGGAGATGAG -3’<br>
Template strand 5’- CTGCTTCACCTGCAGGGAGATGAG -3’<br>

Revision as of 02:12, 16 June 2013

Team:BV CAPS Kansas Team Page Code Testing 2 - 2013hs.igem.org

BV CAPS iGEM Tweets

Thanks!

Methods

Two separate methods for getting the appropriate restriction sites on the PLC-5 gene were considered.
PCR AND SITE-DIRECTED MUTAGENSIS
The first part first method involved using PCR annealing and extension to add the BioBrick standard restriction sites per the instructions given by the Registry. Theoretically, this method was simple. All it required was forwards and reverse primers that consisted of the BioBrick prefixes and suffixes and the first twenty base pairs of the gene.
Forward primer
5’- GTTTCTTGGAATTCGCGGCCGCTTCTAGATG TCAAAGTCCCACAGTGAAGC -3’
Reverse Primer
To orient the sequence 5’-to-3’, it was necessary to use the reverse compliment of the last twenty base pairs of the gene.
5’- GTTTCTTCCTGCAGCGGCCGCTACTAGTA TTATTACGGGACGGGCACCACGCGCA -3’
After this, it would be possible to proceed with PCR as normal, and though the region of restriction sites would “hang off” in the first round of PCR, they would be added to the PLC-5 gene as “flanks” in subsequent rounds. However, a number of challenges presented themselves. First and foremost, the PLC-5 gene contains in its sequence two PstI restriction sites. It was necessary to use site-directed mutagenesis to remove these sites prior to cleaving and ligating the part, as the PstI would chop PLC-5 to pieces.
Site-directed mutagenesis is a method for altering the sequence of DNA and can be used to produced both point and frame-shift mutations. In this case, it was possible to take advantage of codon redundancy and alter the DNA sequence without altering the amino acid sequence. Primer design was also very simple, as the primers were identical to the gene except that they contained the desired mutations. Again, the primers were about 20 bp to ensure that they would only attach to one region along the gene.
Forward primer
Template strand- 5’- ctcatctccctgcaggtgaagcag 3’
Primer -5’- ctcatctccctccaggtgaagcag 3’
(Restriction sites are in red, point mutation is in blue)
Reverse primer
Again, the reverse primer necessitated the use of the reverse compliment of the original sequence.
Template strand 5’- CTGCTTCACCTGCAGGGAGATGAG -3’
Primer 5’- CTGCTTCACCTGCAGGGAGATGAG 3’
The second problem concerned the length of primers, which at 51 and 55 bp, far exceeded the typical 40-45 bp. The long “free ends” that contained the restriction sites threatened to rip the section of matching sequence away from the template strand. It proved impossible to shorten these primers while still including the standard restriction site. Nonetheless, the primers were ordered and the experiment was attempted.
In the event of the failure of these super-long primers to anneal properly, it would also be possible to construct the restriction site flanks through multiple rounds of PCR, though this would be more time-consuming.
GIBSON ASSEMBLY
The second method considered would be to construct the PCL-5 gene entirely from oligos using Gibson assembly. The artificial synthesis of the approximately 1500-bp gene would require four oligos of single-stranded DNA. The ends of these oligos would contain small section of overlapping sequence, and could be annealed together, with DNA polymerase and DNA ligase completing and sealing the double strand. After this point, it would be possible to proceed with standard PCR.
The primary advantages of Gibson assembly included the fact that it would be possible to build the BioBrick restriction sites and altered PstI sites into the oligos. This is far simpler than using site-directed mutagenesis and PCR; however, ordering (and waiting for the synthesis of) such long oligos would actually be more time-consuming than using PCR and site-directed mutagenesis.

Tinker Cell

A program called TinkerCell was utilized to help visualize the steps taken through glycolysis and the fatty-acid pathway to create alkanes. The image created in TinkerCell allows one to see each step in the modification of a molecule. Beginningwith glucose and ending with alkanes, the image shows what the molecule becomes, which enzyme catalyzes the reaction, what type of reaction occurs, what is required for the reaction to occur, and the other products of the reaction.

Retrieved from "http://2013hs.igem.org/Team:BV_CAPS_Kansas/Project/Methods"